Sponge foam machine is the sponge raw material from the storage tank temperature, the metering system by the proportion of the mixer to the high-speed mixing, the fabric body will be evenly poured into the paper mold, and then sent to the aging box polymerization reaction, the cutting machine According to the need to cut a certain length of the block material, and finally transported by the conveyor belt finished sponge, that is, to complete the sponge production process.

        Sponge foam machinery safety precautions

        1, the production workshop must be well ventilated.

        2, sponge and raw materials are flammable, should do a good job of fire prevention work, sponge production, the possibility of spontaneous combustion, must be monitored for more than 6 hours.

        3, sponge raw materials M.C, TDI for the toxic substances, the operation must be strict splash into the eyes and nose and mouth, etc., if strayed into the eyes must immediately rinse with plenty of water, and then to the hospital.

        4, the machine must be well grounded.

        5, non-professionals are not allowed to open the electrical box, or the risk of electric shock, mechanical maintenance should be cut off before the power supply, electrical maintenance must be done security work, so as to avoid danger.

        6, the machine should be completed after the timely use of power to prevent the machine for a long time power and affect the service life.

        7, cut off the machine after use, the automatic switch must be hit to the manual position, to prevent malfunction caused by maintenance and dangerous.

        8, M.C tank in the feeding and foaming must be opened before the top of the exhaust valve to prevent the increase in pressure caused by feeding danger.

        9, the mixer is strictly prohibited for a long time idle (allow idle time of about 15 seconds), long idle mixer, will lead to serious wear and tear bearing.

        10, the components of the pump, not long high-speed idling, low-speed idle time shall not exceed 30 seconds.

        11, the main mixer, silicone oil mixer, the pump must be in accordance with the provisions of the direction of operation.

        12, the main mixer shall not be oil-free operation, or easy to damage the seals and bearings.

        13, the staff should wear protective glasses, anti-virus masks and gloves.

        Sponge foam machine factory direct customer satisfaction is our most demand