Polyether 330N: Sponge Rally EP-6006 (specifically to improve the tensile strength of sponge);

        Light bulb stabilizer BP-1002 (low density sponge special additives to prevent sponge collapse, cracking, cracks and other phenomena, can greatly improve the hardness of low-density sponge, and sponge pores play a supporting role; to maintain the sponge From top to bottom of the uniformity, greatly improving the sponge hole rate and the fine pores, the sponge can get better flexibility);

        Sponge plus agent HME-810 (can greatly improve the hardness and elasticity of the sponge, to get the same degree of hardness, use this product can reduce the TDI index or increase the amount of stone powder to reduce the overall cost of sponge);

        Special polyether HR-760 (mainly used for stone powder added in more than 100% of the sponge, can greatly improve the tensile strength of sponge);

        Flame compound BL-6321 (can be washed side by side, and the complex fastness and washing degree can reach the European and American export standards);

        Flame complex agent BL-6815 (most of the domestic sponge plant used by the flame compound, generally with clothing fabrics);

        Flame retardant compound MK-370 (with this product, the sponge can get the effect of compound fastness, but also can get the effect of high flame retardant, in the formula does not need to add any flame retardant sponge can achieve high flame And the compound fastness is very good effect, generally suitable for automotive fabric sponge compound; and the product added a small amount);

        Flame retardant V6200 (flame retardant effect of the British standard, anti-yellow core, add a small amount);

        Amine catalyst KE9727 (amount of only A33 of 1/3, is the starting and gel balance of the amine, in the case of more powder powder foam is very smooth, good stability, easy to operate);

        Amine catalyst KC-68: KE9727 with the same amount of usage, sponge effect is the same, the cost is lower than the 9727

        Amine catalyst Am-90 (the same effect as CS90 catalyst, stability and operability without KE9727 so good);

        Amine catalyst SMP (for low density sponge foam);

        Dimethyl ethanolamine: Amine catalyst CS90: A-1: ​​A-33: Delayed amine catalyst 8154 (mainly used for high-elastic molding sponge in the hair and gel phase balance, better elasticity, better pores);

        High flame retardant sponge anti-yellow core agent KL-3100 (to prevent high flame retardant sponge core, yellow; this product is also suitable for ordinary sponge, to prevent sponge core phenomenon);

        Tin catalyst K-19 (organotin)

        Low density silicone oil 8183 (sponge density in the case of 5-15 can be used in this case of silicone oil): ordinary silicone oil Y10901C: L-580: flame retardant silicone oil 8232: DC5950: sponge softener GM210: slow rebound silicone oil 8002: high rebound Silicone oil 8681: 8715: 8719: Y10366: sponge resistance to yellowing agent (mainly used for underwear cotton)